2022+ Toyota Tundra - Air Spring Kit

Coil replacement Primary Air Suspension

$699.95

SKU: 89-52220

In stock

Management: Manual Inflation Kit - Airline w/ Schrader Valves

Controller: AirIQ App (Free Download)

Tank: No Tank

Product Questions? Ask An Expert!

Send us a message and we will get right back to you.

2022+ Toyota Tundra - Air Spring Kit

$699.95

Product Information

Upgrade your Toyota Tundra with LOGIQ’s Air Spring Kit—a coil replacement solution that swaps factory coils (or factory air) for primary air at the rear axle. Enjoy a smoother ride unloaded, superior load support when hauling, and adjustable height for easier loading or trailer hookup. Fits factory-height trucks and up to 3” lifts out of the box. With a 6,000 lb capacity at 150 PSI, it’s smarter air suspension for serious work.

Fitment Notes

Trucks equipped with Factory Air Suspension require additional adapter kit 89-52220-AET.

Ride Height = factory to +3". For lift amount greater than +3" to +6" add spacer kit 89-52220-3.

5th Wheel Hitch Compatibility

Compatible with all 5th wheel hitches.

Kit Includes

(1) Driver Side Air Spring Assembly
(1) Passenger Side Air Spring Assembly
(1) Hardware Kit
(1) Manual Inflation Kit
(1) Exhaust Heat Wrap Kit

Tech Specs

Air Spring Location: Axle Mounted Inboard Frame Rails
Air Spring Quantity: 2
Lifting Force: 6,000 lbs @ 150 psi
Payload Capacity: 3,500 lbs @ 150 psi
Maximum Pressure: 150 psi
Minimum Pressure: 20 psi

Downloads

Installation Instructions

Safety & Warnings

SAE J2492—SUSPENSION MODIFICATION WARNING:

By installing this product, you acknowledge that your vehicle's suspension has been modified and that its handling characteristics may differ from factory specifications.

Vehicle Handling: Modified suspension systems may change vehicle handling, stability, and rollover characteristics. Exercise extreme caution during sharp turns, sudden maneuvers, and abrupt braking.

Safe Driving: Always wear seat belts and drive responsibly. Reduced speeds and specialized driving techniques may be necessary to maintain vehicle control.

Driver Responsibility: Do not operate the vehicle unless you understand its modified handling characteristics and are confident in your ability to maintain control under all driving conditions.

Risk of Injury: Failure to operate a modified vehicle safely may result in loss of control, rollover, serious injury, or death.

Modification Compatibility: Certain modifications or combinations of modifications are not recommended and may be prohibited by state law.

Legal Compliance: Consult your owner's manual, product installation instructions, and applicable state laws before making modifications. You are responsible for ensuring your vehicle remains safe and legally compliant.

MAXIMUM PAYLOAD WARNING:

Never exceed manufacturer's Maximum Payload or GVWR

California Prop 65 Warning

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl) phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov/product.

Optimized Ride Quality

OE-style LOGIQ air springs feature a low frequency design for smooth performance, even while towing and hauling.

Enhanced Stability & Support

LOGIQ high-endurance air springs provide up to 6,000 lbs of lifting capacity.
(3,500 lbs of payload)

OEM Hitch Integration

Compatible with a wide variety of OEM and aftermarket 5th wheel hitches.

Precision Fitment

Built-in features that locate off the factory frame and axle guarantees proper fitment and operation for every install.

Lifetime Warranty

Air Spring Kits come with a Limited Lifetime Warranty and FREE ReadyGUARD 5-year - 60,000 mile Powertrain Warranty.

Coil Replacement

A smoother ride unloaded, a more stable ride when towing and hauling.
Experience the best of both worlds.

Level Any Load

With 3" surplus of extension travel, you can lift the rear all the way up or air down to the bump stops.

For Work / For Play

Experience hard working comfort that lets you focus on the road ahead, not the harsh ride you're used to.

6,000 lb

Total Lifting Force at 150 PSI

3,500 lb Payload Capacity at 150 PSI
(Never Exceed Maximum Payload or GVWR)

Which Air Management is right for you?

Complete your kit with Air Management that best suits your needs. LOGIQ AirIQ is the brains of the operation that will intelligently manage the air delivery to your Air Spring Kit. Each AirIQ kit can be controlled with the free AirIQ App or paired with the optional Remote Control.

AirIQ HD2

For those who demand the best-of-the-best Air Management. The AirIQ HD2 has a 2-channel Smart Manifold that can independently control the driver side and passenger side Air Springs. Mated to the manifold is the Heavy-Duty compressor, tested to be up to 2.5x faster than the competition.

AirIQ SD2

If you like total control, but don't need the fastest option available, you might like the AirIQ SD2. This kit utilizes the same 2-channel Smart Manifold as the HD2, however this option is paired with the Standard Duty compressor. Standard doesn't mean bad though, as this compressor still twice as fast as the competition.

AirIQ SD1

When you want a sophisticated yet simple solution: The AirIQ SD1 utilizes our 1-channel Smart Manifold and Standard Duty Compressor. Enjoy speedy lifting and paired rear controls.

Manual Inflation Kit

Some people crave simplicity. No Apps needed, No Wiring Necessary. Included is a length of air line , schrader valves and zip ties. Everything you need to hook up to your Air Spring Kit and manually inflate to your desired rear ride height. The Manual Inflation Kit is the default option when purchasing any LOGIQ Air Spring Kit.